V-TEK TM-401 User Manual page 72

3-30
When Reset Job is pressed, the following message appears.
• The System Homing button allows the user to home the motor. Homing motors
should be done once following every system power up. When System Homing is
selected, the Homing Status window will appear.
Pressing the Home All Motors button begins the homing sequence. Homing
progress is displayed in the Pick Axis Motor Status Bar.
As the homing sequence is completed, the bar gradually turns from black to
green. A Homing Succeeded! message appears at the end of the sequence.
Run Tab
TM-401 User's Guide
D292104.6.fm