Table of Contents
Advertisement
4-22
10.
Set Place Position
Step 6:
Setup HMI
NOZZLE
11.
Set Place Nozzle Height The Pick Head's Z Axis (up/down) position needs to be
Configure HMI Settings
a. Use the Arrow keys to position the Pick Head and Carrier Tape so the Nozzle
is centered over the carrier tape placement position.
The Up/Down Arrow keys move the Pick Head forward and backward. The
Left/Right Arrow keys move the tape left and right in the Taper Track.
b. When the Nozzle is centered over the tape pocket, press Set Place Position
to set the position.
c. Press the right Arrow Key to move to the next Job Wizard screen.
TM-401 User's Guide
D292104.7a.fm
Advertisement
Table of Contents
