Home Motors - V-TEK TM-401 User Manual

4-4

Home Motors

Step 2:
Note: The TM-401 needs to be homed once after each power up or Emergency
Home
Stop activation. The HMI will prompt the operator to home the motors whenever it
Motors
is required. Once the motors have been homed, they remain homed until the
machine is powered down or the E-Stop is activated.
1. Press the red Home Required button at the top of the Tab Menu..
2. The TM-401 motor homing sequence begins with the pick head moving slowly to
the right towards the taper (X Axis movement).
When the head has stopped moving, homing is complete.

Home Motors

TM-401 User's Guide
D292104.7a.fm