Table of Contents
Advertisement
Chapter 4: Setup
Step 6:
9.
Nozzle Setup: Manual Rotation
Setup HMI
NOZZLE
D292104.7a.fm
and the part. Because the Convum Nozzle Tips are flexible, it is all right if the tip is
programmed to touch the part when picking.
j.
Press the right Arrow Key to move to the next Job Wizard screen.
a. Press Pick Part to activate the Pick Head and pick a part from the Pick
location.
b. If the part needs to be rotated before it is placed in tape, Press Rotate Part.
This will rotate it +90°. If no rotation is required for part placement, skip this
step.
c. Press the right Arrow Key to move to the next Job Wizard screen.
4- 21
Configure HMI Settings
Advertisement
Table of Contents
