Table of Contents
Advertisement
Chapter 6: Operation
Step 2:
2.
Press the Home All Motors button.
Home
Motors
The motor homing sequence begins with the nozzle moving slowly upwards (Z
Axis movement). After about a three second delay, the pick head will begin to
move slowly to the right towards the taper (X Axis movement).
The homing sequence will continue until the nozzle has risen to its highest position
and then returned to home and the head has moved all the way to the right and
then returned to home..
Homing progress is displayed as a green bar in the Pick Axis Motor field of the
Homing window. Once the nozzle and head have stopped moving, homing is
complete. A Homing Succeeded! message will appear on the bottom of the
screen.
Press the left Arrow button to return to the Job screen.
D292104.8a.fm
Preparing to Run a Pre-programmed Job
6- 5
Advertisement
Table of Contents
