Power Requirements - V-TEK TM-401 User Manual

1-4
When positioning the TM-401, choose an area that is not located below overhead gantries, walk-
ways or power lines to ensure objects or liquids cannot be dropped on the machine from over-
head.

Power Requirements

The TM-401 will also require access to a 85-110 PSI air pressure system and a 120/240 VAC,
50/60 Hz power supply. Locate the machine so electrical power cables can be routed away from
areas where personnel are expected to move.
Note: It is recommended that cables be routed overhead or underground. If cables must
be routed over the floor, cover them with rubber ramps.
Preparing the Work Area
TM-401 User's Guide
D292104.4.fm