Table of Contents
Advertisement
3-24
the pick head is homed, the current position will be 0.00. This distance is measured in mil-
limeters.
Press the right Arrow button to open the second Head Setup screen (shown below).
Head Screen 3
A.
The Pick Extend/Pick Retract button actuates the pick solenoid to enable the
operator to set the pick height.
The Rotate Part button rotates the pick head to the preset rotation angle.
The Place Extend/Place Retract button actuates the place solenoid to enable the
operator to set the place height.
B.
The Part Placement Rotation Angle is manually set during machine setup. The
options are 0, -90 and +90.
Head Tab
A
C
Rotation Options
0
TM-401 User's Guide
B
-90
+90
D292104.6.fm
Advertisement
Table of Contents
