Table of Contents
Advertisement
5-10
Configure Inspection
Note: Significant portions of this documentation were provided by: Keyence Cor-
poration of America. In order to use the Keyence IV Vision System, the camera
must be configured and set to Run Mode in the Keyence HMI as well as being
enabled on the TM-401 HMI. Please complete the following instructions to cor-
rectly configure the vision system.
Configure Computer
1.
Once the connection is complete, the Run/Program window will open. Select
Program.
Configure Inspection
TM-403 User's Guide
D292104.16.fm
Advertisement
Table of Contents
