3-16
Press the right Arrow Key to move to the next Job Wizard screen.
Job Wizard Step 14
A.
Select the Camera State to ON ( I ) or OFF (O) as desired.
B.
If the camera is ON, enter the number of pockets between the Place point and the
Inspection point in the Parts Until Inspection field. Begin the count with the Place
position as 0 so the Place pocket is not included in the count.
Press the right Arrow Key to move to the final Job Wizard screen.
Job Wizard Step 15
A.
Browse through the Job Library using the Up/Down Arrow keys to move up or
down through the list. To select a Job Name from the list, press the Enter key.
Job Tab
A
B
A
B
TM-401 User's Guide
C
D292104.6.fm