Table of Contents
Advertisement
8-6
2.
Remove the air line from the Nozzle Shank.
3.
Use a needle-nose pliers to remove the air line from
the Upper Filter Fitting which is located at the top of
the Vacuum Filter.
4.
Use a 2.5mm Hex wrench to remove the retaining
screw that holds the Filter in place.
5.
Lift the Filter from the housing and remove it from the
machine.
6.
Blow air through the filter to clean it or replace with a
new filter. (See Spare Parts List in the back of this
User's Guide for order information.).
7.
Replace the Filter on the Pick Head, reconnecting the
air line at the top of the Vacuum Filter and at the Noz-
zle Shank.
General Maintenance Tasks
TM-401 User's Guide
D292104.10a.fm
Advertisement
Table of Contents
