V-TEK TM-401 User Manual page 6

Introduction
Thank you for purchasing the TM-401 Component Handling Machine. The TM-401 is a table-
top pick and place tape and reel machine with vision, designed for use in production environ-
ments for electronic devices. This machine accepts devices loaded in tubes, and a dual tube
input option is available. It features a 2D over tape vision system for component verification. A
touch screen interface simplifies the setup process, and minimizes set up time and operator
intervention for fast, easy functioning.
Standard Features:
• Touch screen operator interface for easy setup and operation
• Single or Dual Tube input options
• Ability to rotate components +/-90° or 180°
• Output to tape
• Innovative universal adjustable heat and PSA sealer
• Software controlled advance movement of carrier tape (2mm to 144mm pitch)
• Adjustable track assembly for tape widths 8mm to 72 mm
• 2D Vision over tape inspection for Mark, Orientation and Empty Pocket Detection.
• User-friendly safety enclosure with multiple access points provides easy access with
minimal downtime
• Table-top machine with optional 80-20 frame
• Jam in Track and Low Cover Tape Detection automatic sensors
Introduction D292104.2.fm ii