V-TEK TM-401 User Manual page 102

4-28
Step 7:
Turning the wheel counter-clockwise will move the guide towards the operator.
Seal Test
Turning it clockwise will move the guide closer to the machine. Adjust the Inner
Seal Adjust and the Outer Seal Adjust to the desired position, then tighten the
Position Locks to secure them.
4. Perform a Seal Test.
The V-TEK PT-55 Peel Force Tester
is pictured on the right. (Sold
separately.)
Proceed to Chapter 5: Vision Setup to configure the Vision System for operation.
Test Seal
TM-401 User's Guide
D292104.7a.fm