Table of Contents
Advertisement
Chapter 3: Human Machine Interface
• If rotation is set at 0, the part will be placed in the same orientation as it was
picked.
• If rotation is set at -90, the part will be rotated 90 degrees clockwise prior to
placement.
• If rotation is set at +90, the part will be rotated 90 degrees counter-clockwise
prior to placement.
Nozzle Blow Off Time is the amount of time in milliseconds that the nozzle will
activate the blow-off pressure to place a part in the Taper.
C.
Press the left Arrow button to return to the second Head Setup screen or press a
button on the Tab Menu to move to a new tab.
Note: The TM-401 will use these settings for the current job. To save Head Settings for
future jobs, go to the Job Tab, select a job name and Save.
D292104.6.fm
3-25
Head Tab
Advertisement
Table of Contents
