Table of Contents
Advertisement
Chapter 5: Setup
Monitor Display: Menu ON
Step 2:
Vision
Setup
CONFIGURE
MONITOR
1.
Title: Displays the device name, the program number and the program name.
2.
Tool name: Displays the tool number and the tool name of the tool selected. The
selected tool can be switched.
3.
Brightness correction range: When Brightness correction is set, the range will
be displayed with a blue frame.
4.
Tool window: Displays the tool window which has been set.
5.
Search Window: If the search window of the tool is set, the range is displayed with
a light blue frame.
7.
MENU/OFF button: Changes the screen from Menu ON to Menu OFF.
8.
Status gauge: Displays the result (OK/NG) of the tool selected.
9.
OK/NG display: Displays the total status result.
10.
Processing time: Displays the time from receiving a trigger until the result is
output.
11.
Image Type display: Displays the situation of the screen. Run mode or Test
mode.
12.
Trig button: Displayed when the external trigger is set. When this button is
touched, a trigger signal is sent to the sensor.
13.
Zoom button: Changes the display to full screen mode and allows image
enlargement.
14.
View button: Displays the menu to select how to show the tools and the analyze
screen.
15.
Monitor settings button: Displays the monitor screen.
D292104.16.fm
5- 29
Configure Inspection
Advertisement
Table of Contents
