Table of Contents
Advertisement
Chapter 3: Human Machine Interface
A.
Center the Pick Head over the first track pocket using the HMI Jog but-
tons or the Jog buttons on top of the Sealer enclosure. To see an illus-
tration of the correct head placement, push the Help icon.
An illustration of the Tube Feeder with the first track
pocket identified will appear.
B.
The distance the head moves with each Jog is set in
the Head Jog Step field.
C.
Press Learn. The Learned Position will now match the
Current Position and the Learn button will turn green
and update to read Learned. (see Step 7 below.)
Press the right Arrow to move to the next Job Wizard screen.
Job Wizard Step 7
A.
Center the Pick Head over the last track pocket using the Jog buttons.
To see an illustration of the correct head placement, push the Help
icon.
B.
The distance the head moves with each Jog is set in the Head Jog Step field.
C.
Press Learn. The right Arrow Key will appear. Press the right Arrow to move to
the next Job Wizard screen.
Note: It is useful to note the current position for both Pick Position 1 and Pick Position 2
for future use or to help when making fine adjustments.
D292104.6.fm
A
C
B
3-11
Job Tab
Advertisement
Table of Contents
