YASKAWA L1000A Technical Manual page 58

3.5 Terminal Cover
2.
Pull forward on the terminal cover to free it from the drive.
Figure 3.10
■
Reattaching the Terminal Cover
Models CIMR- L 2A0018 to 2A0075 and 4A0009 to 4A0039
Power lines and signal wiring should pass through the opening provided.
page 68 and Wiring the Control Circuit Terminal on page 72
Reattach the terminal cover after completing the wiring to the drive and other devices.
Figure 3.11
Models CIMR- L 2A0085 to 2A0415 and 4A0045 to 4A0260
After wiring the terminal board and other devices, double-check connections and reattach the terminal cover.
Wiring the Main Circuit Terminal on page 68
wiring.
Figure 3.12
Connect ground wiring first,
followed by the main circuit,
and then wire the control circuit.
58
Figure 3.6 Removing the Terminal Cover
for details on wiring.
Connect ground wiring first,
followed by the main circuit,
and then wire the control circuit.
Power lines and signal wiring
exit through the opening provided.
Figure 3.7 Reattaching the Terminal Cover
and Wiring the Control Circuit Terminal on page 72
Figure 3.8 Reattaching the Terminal Cover
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
YEA_common
Refer to Wiring the Main Circuit Terminal on
YEA_common
YEA_common
Refer to
for details on