5.1 A: Initialization
4.
Enter the password "1234".
5.
Press
to save the new password.
6.
Drive returns to the parameter display.
7.
Press
and scroll to A1-02.
8.
Press
to display the value set to A1-02. If the first "2" blinks, parameter settings are unlocked.
9.
Use
or
to change the value if desired (though changing the control mode at this point is not typically done).
10.
Press
to save the setting, or press
11.
The display automatically returns to the parameter display.
Note: Parameter settings can be edited after entering the correct password. Performing a 2-wire initialization resets the password to
"0000". Reenter the password to parameter A1-05 after drive initialization.
146
Step
to return to the previous display without saving changes.
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Display/Result
-PRMSET-
PRG
Enter Password
A1- 04 =
1234
(0~9999)
"0"
←
→
FWD
Entry Accepted
-PRMSET-
PRG
Enter Password
A1-
04
=
0
(0~9999)
"0"
←
→
FWD
-PRMSET-
PRG
Control Method
A1-02= 2
∗2∗
Open Loop Vector
←
→
FWD
-PRMSET-
PRG
Control Method
A1-02=
2
∗2∗
Open Loop Vector
←
→
FWD
-PRMSET-
PRG
Control Method
A1-02=
0
∗2∗
V/F Control
"2"
←
→
FWD
V/f
Entry Accepted
-PRMSET-
PRG
Control Method
A1-02= 0
∗0∗
V/F Control
←
→
FWD