Models CIMR-L 2A0085 to 2A0415, CIMR-L 4A0045 to 4A0260
1.
Use a Phillips screwdriver (M4) to loosen the screw holding the CN19 connector cover in place.
Figure 4.23
2.
Slide the CN19 connector cover from the drive as shown in
Figure 4.24
3.
Insert a straight-edge screwdriver into the opening as shown in
cover by sliding it as shown in
Figure 4.25
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Screw
Connector
cover
Phillips screwdriver (M4)
Figure 4.27 Removing the CN19 Connector Cover
Figure 4.28 Sliding the CN19 Connector Cover
Figure
4.29.
Figure 4.29 Removing the CN19 Connector Cover
4.6 Setup Procedure for Elevator Applications
Figure
4.28.
Figure
4.29, then remove the CN19 connector
4
131