YASKAWA L1000A Technical Manual page 300

7.4 Drive Cooling Fans and Circulation Fans
■
Installing the Cooling Fan
Reverse the procedure described above to reinstall the cooling fan.
1.
Install the replacement fan into the drive. Align the pins as shown in
Figure 7.15
2.
Properly connect the fan power lines then replace the power supply connectors and cables into the recess of the
drive.
Figure 7.16
YEA_TMonly
3.
Angle the fan cover as shown in
drive.
Figure 7.17
300
YEA_TM
only
Figure 7.15 Installing the Cooling Fan: 4A0075, 4A0091
A – Back
Figure 7.16 Cooling Fan Power Supply Connectors: 4A0075, 4A0091
Figure 7.15
Figure 7.17 Reattach the Fan Cover: 4A0075, 4A0091
Figure
B – Front
and insert the connector tabs into the corresponding holes on the
Holes for connector tabs.
Fan finger guard
Four tabs
Hook
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
7.15.
A
B
Back of Drive
YEA_
TMonly
Hook
Front of Drive