YASKAWA L1000A Technical Manual page 132

4.6 Setup Procedure for Elevator Applications
4.
Connect the cable to the CN19 connector port on the drive.
Note: The connector port location and angle vary by drive model.
NOTICE: Be sure that the connector fastens at the correct angle to the CN19 connector port. The incorrect angle could damage the
battery, cable, or connector.
Figure 4.26
5.
The cable should pass through the connector cover with the cover fastened to the drive.
Figure 4.27
6.
Slide the CN19 connector cover back into place as shown in
NOTICE: Make sure the cable does not get pinched between the drive and the CN19 connector cover, as this could damage the cable.
Figure 4.28
132
Figure 4.30 Connecting the Cable
Figure 4.31 Reattaching the CN19 Connector Cover
Downward
Figure 4.32 Sliding the CN19 Connector Cover into Place
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Port CN19
Battery cable
Figure 4.32.
Leftward