YASKAWA L1000A Technical Manual page 43

Internal/Flush-Mount
An internal flush-mount requires an installation support set that must be purchased separately. Contact a Yaskawa
representative to order an installation support set and mounting hardware.
Installation Support Set A.
1.
Cut an opening in the enclosure panel for the digital operator as shown in
2.
Mount the digital operator to the installation support.
3.
Mount the installation support set and digital operator to the enclosure panel.
Figure 2.8
M4 × 10
Phillips truss head screw × 4
(for panel widths between 1 and 1.6)
common_TMonly
Note: Use a gasket between the enclosure panel and the digital operator in environments with a significant amount of dust or other
airborne debris.
Figure 2.9
Figure 2.10 Panel Cut-Out Dimensions (Internal/Flush-Mount Installation)
YASKAWA ELECTRIC SIEP C710616 38A YASKAWA AC Drive L1000A Technical Manual
Figure 2.9 Internal/Flush Mount Installation
45
+0.5
59
0
2.2 Mechanical Installation
Figure 2.9 illustrates how to attach the
Figure 2.10.
Enclosure panel
Digital Operator
Installation Support Set A
M3 × 6
Phillips recessed
pan head machine screw × 2
Unit: mm
common_TMonly
Unit : mm
2
43