Settings; Interlocking For Bus-Section Breaker A1A2_Bs; Identification; Functionality - ABB REC650 Technical Manual

1MRK 511 287-UEN A
10.4.3.6
10.4.4
10.4.4.1
10.4.4.2
Technical manual
Table 202: BB_ES Output signals
Name Type
QCREL BOOLEAN
QCITL BOOLEAN
BBESOPTR BOOLEAN
BBESCLTR BOOLEAN

Settings

The function does not have any settings available in Local HMI or Protection and
Control IED Manager (PCM600).

Interlocking for bus-section breaker A1A2_BS

Identification

Function description
Interlocking for bus-section breaker

Functionality

The interlocking for bus-section breaker (A1A2_BS) function is used for one bus-
section circuit breaker between section 1 and 2 according to figure 133. The function
can be used for different busbars, which includes a bus-section circuit breaker.
WA1 (A1)
QC1
IEC04000516 V1 EN
Figure 133: Switchyard layout A1A2_BS
Description
Switching of QC is allowed
Switching of QC is forbidden
QC on this busbar part is in open position
QC on this busbar part is in closed position
IEC 61850
identification
A1A2_BS
WA2 (A2)
QB1 QB2
QA1
QC3 QC4
A1A2_BS
Section 10
Control
IEC 60617 ANSI/IEEE C37.2
identification device number
- 3
QC2
en04000516.vsd
267