Function Block - ABB REC650 Technical Manual

Section 12
Monitoring
12.16.3
12.16.4
484

Function block

SSIMG
BLOCK PRESSURE
BLK_ALM PRES_ALM
PRESSURE PRES_LO
TEMP TEMP
PRES_ALM TEMP_ALM
PRES_LO TEMP_LO
SET_P_LO
SET_T_LO
RESET_LO
IEC09000129-1-en.vsd
IEC09000129 V1 EN
Figure 228: SSIMG function block
Signals
Inputs PRESSURE and TEMP together with settings PressAlmLimit,
PressLOLimit, TempAlarmLimit and TempLOLimit are not supported
in this release of 650 series.
Table 419: SSIMG Input signals
Name Type
BLOCK BOOLEAN
BLK_ALM BOOLEAN
PRESSURE REAL
TEMP REAL
PRES_ALM BOOLEAN
PRES_LO BOOLEAN
SET_P_LO BOOLEAN
SET_T_LO BOOLEAN
RESET_LO BOOLEAN
Table 420: SSIMG Output signals
Name Type
PRESSURE REAL
PRES_ALM BOOLEAN
PRES_LO BOOLEAN
TEMP REAL
TEMP_ALM BOOLEAN
TEMP_LO BOOLEAN
Default Description
0 Block of function
0 Block all the alarms
0.0 Pressure input from CB
0.0 Temperature of the insulation medium from CB
0 Pressure alarm signal
0 Pressure lockout signal
0 Set pressure lockout
0 Set temperature lockout
0 Reset pressure and temperature lockout
Description
Pressure service value
Pressure below alarm level
Pressure below lockout level
Temperature of the insulation medium
Temperature above alarm level
Temperature above lockout level
1MRK 511 287-UEN A
Technical manual