Local Remote Locrem; Identification; Functionality; Function Block - ABB REC650 Technical Manual

Section 10
Control
10.3.6
10.3.6.1
10.3.6.2
10.3.6.3
10.3.6.4
244

Local remote LOCREM

Identification

Function description
Local remote

Functionality

The signals from the local HMI or from an external local/remote switch are applied via
the function blocks LOCREM and LOCREMCTRL to the Bay control QCBAY
function block. A parameter in function block LOCREM is set to choose if the switch
signals are coming from the local HMI or from an external hardware switch connected
via binary inputs.

Function block

LOCREM
CTRLOFF OFF
LOCCTRL LOCAL
REMCTRL REMOTE
LHMICTRL VALID
IEC09000076_1_en.vsd
IEC09000076 V1 EN
Figure 113: LOCREM function block

Signals

Table 188: LOCREM Input signals
Name Type
CTRLOFF BOOLEAN
LOCCTRL BOOLEAN
REMCTRL BOOLEAN
LHMICTRL INTEGER
Table 189: LOCREM Output signals
Name Type
OFF BOOLEAN
LOCAL BOOLEAN
REMOTE BOOLEAN
VALID BOOLEAN
IEC 61850 IEC 60617
identification identification
LOCREM -
Default Description
0 Disable control
0 Local in control
0 Remote in control
0 LHMI control
Description
Control is disabled
Local control is activated
Remote control is activated
Outputs are valid
1MRK 511 287-UEN A
ANSI/IEEE C37.2
device number
-
Technical manual