1MRK 511 287-UEN A
10.3.6.5
Table 190:
LOCREM Non group settings (basic)
Name
Values (Range)
ControlMode
10.3.7
10.3.7.1
10.3.7.2
10.3.7.3
Technical manual
Settings
Unit
Internal LR-switch
-
External LR-switch
Local remote control LOCREMCTRL
Identification
Function description
Local remote control
Functionality
The signals from the local HMI or from an external local/remote switch are applied via
the function blocks LOCREM and LOCREMCTRL to the Bay control QCBAY
function block. A parameter in function block LOCREM is set to choose if the switch
signals are coming from the local HMI or from an external hardware switch connected
via binary inputs.
Function block
LOCREMCTRL
^PSTO1
^PSTO2
^PSTO3
^PSTO4
^PSTO5
^PSTO6
^PSTO7
^PSTO8
^PSTO9
^PSTO10
^PSTO11
^PSTO12
IEC09000074_1_en.vsd
IEC09000074 V1 EN
Figure 114:
LOCREMCTRL function block
Step
Default
-
Internal LR-switch
IEC 61850
identification
LOCREMCTRL
^HMICTR1
^HMICTR2
^HMICTR3
^HMICTR4
^HMICTR5
^HMICTR6
^HMICTR7
^HMICTR8
^HMICTR9
^HMICTR10
^HMICTR11
^HMICTR12
Section 10
Description
Control mode for internal/external LR-
switch
IEC 60617
ANSI/IEEE C37.2
identification
device number
-
-
Control
245