Macro Global Description - Cisco Sx350 Cli Manual

Macro Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Example.
The following is an example of a macro being defined and then applied to the
switch with the trace option.
switchxxxxxx(config)#
Enter macro commands one per line. End with the character '@'.
line console
exec-timeout $timeout-interval
@
switchxxxxxx(config)#
Applying command...
Applying command...

38.5 macro global description

Use the macro global description Global Configuration command to enter a
description which is used to indicate which macros have been applied to the
switch. Use the no form of this command to remove the description.
Syntax
macro global description
no macro global description
Parameters
•
text
—Description text. The text can contain up to 160 characters.
Default Configuration
The command has no default setting.
Command Mode
Global Configuration mode
macro name console-timeout
macro global trace console-timeout $timeout-interval 100
'line console'
'exec-timeout 100'
text
38
812