File System Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
18.3 boot config
To install a file as Startup Configuration after reload, use the boot config command
in Privileged EXEC mode. To uninstall the Startup configuration file, use the no form
of this command.
Syntax
startup-config-url
boot config
boot config running-config
boot config mirror-config
no boot config
Parameters
•
startup-config-url
configured.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
User Guidelines
startup-config-url
Use the boot config
startup-config-url
from the
commands. The command performs the following actions:
•
Copies the file into the system directory flash://system/configuration/
•
Converts the file format from the text format in the inner binary format.
•
Installs the converted file as Startup Configuration. The previous Startup
Configuration file is deleted.
Use the boot config running-config command to install Startup Configuration from
Running Configuration.
Use the boot config mirror-config command to install Startup Configuration from
the Mirror Configuration file.
—the url of a file. The predefined URLs cannot be
command to install Startup Configuration
file. The file must be a text file containing CLI
18
422