Spanning-Tree Commands; Spanning-Tree - Cisco Sx350 Cli Manual

Spanning-Tree Commands

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
58.0

58.1 spanning-tree

Use the spanning-tree Global Configuration mode command to enable
spanning-tree functionality. Use the no form of this command to disable the
spanning-tree functionality.
Syntax
spanning-tree
no spanning-tree
Parameters
N/A
Default Configuration
Spanning-tree is enabled.
Command Mode
Global Configuration mode
Example
The following example enables spanning-tree functionality.
switchxxxxxx(config)# spanning-tree
58
1101