Show Ip Igmp Snooping Mrouter - Cisco Sx350 Cli Manual

IGMP Snooping Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Automatic learning of Multicast router ports is enabled
IGMP Snooping Querier is enabled
IGMP Snooping Querier operation state: is running
IGMP Snooping Querier version: 2
IGMP Snooping Querier election is enabled
IGMP Snooping Querier address: 194.12.10.166
IGMP snooping robustness: admin 2
IGMP snooping query interval: admin 125 sec oper 125 sec
IGMP snooping query maximum response: admin 10 sec oper 10 sec
IGMP snooping last member query counter: admin 2 oper 2
IGMP snooping last member query interval: admin 1000 msec oper 500 msec
Groups that are in IGMP version 1 compatibility mode:
231.2.2.3, 231.2.2.3

23.18 show ip igmp snooping mrouter

To display information on dynamically learned Multicast router interfaces for all
VLANs or for a specific VLAN, use the show ip igmp snooping mrouter command
in User EXEC mode.
Syntax
show ip igmp snooping mrouter [interface
Parameters
•
vlan-id
interface
Command Mode
User EXEC mode
Example
The following example displays information on dynamically learned Multicast
router interfaces for VLAN 1000:
switchxxxxxx# show ip igmp snooping mrouter interface 1000
oper 2
vlan-id
—(Optional) Specifies the VLAN ID.
]
23
500