Crypto Key Import - Cisco Sx350 Cli Manual

54
RSA and Certificate Commands
Syntax
crypto key generate rsa
Parameters
N/A
Default Configuration
The application creates a default key automatically.
Command Mode
Global Configuration mode
User Guidelines
RSA keys are generated in pairs - one public RSA key and one private RSA key.
If the device already has RSA keys, a warning is displayed with a prompt to
replace the existing keys with new keys.
See Keys and Certificates for information on how to display and copy this key pair.
Example
The following example generates RSA key pairs where a RSA key already exists.
switchxxxxxx(config)# crypto key generate rsa
Replace Existing RSA Key [y/n]? N
switchxxxxxx(config)#

54.3 crypto key import

The crypto key import Global Configuration mode command imports the
DSA/RSA key pair.
Use the no form of the command to remove the user key and generate a new
default in its place.
Syntax
crypto key import {dsa | rsa}
1045 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide