Private-Vlan - Cisco Sx350 Cli Manual

67
1285
Protocol
Subnet
MAC

67.30 private-vlan

Use the private-vlan Interface VLAN Configuration mode command to configure a
private VLAN. Use the no form of this command to return the VLAN to normal VLAN
configuration.
Syntax
private-vlan {primary | community | isolated}
no private-vlan
Parameters
•
primary—Designate the VLAN as a primary VLAN.
•
community—Designate the VLAN as a community VLAN.
•
isolated—Designate the VLAN as an isolated VLAN.
Default Configuration
No private VLANs are configured.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
•
The VLAN type cannot be changed if there is a private VLAN port that is a
member in the VLAN.
•
The VLAN type cannot be changed if it is associated with other private
VLANs.
•
The VLAN type is not kept as a property of the VLAN when the VLAN is
deleted.
Virtual Local Area Network (VLAN) Commands
2 72
1 15
1 77
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide