System Management Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Syntax
show cpu utilization
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
Privileged EXEC mode
User Guidelines
Use the show cpu-utilization command to enable measuring CPU utilization.
Example
The following example displays CPU utilization information.
switchxxxxxx> show cpu utilization
CPU utilization service is on.
CPU utilization
--------------------------------------------------
five seconds: 5%; one minute: 3%; five minutes: 3%
62.8 show environment
To display environment information, use the show environment EXEC mode
command.
Syntax
show environment {all | fan | temperature {status} }
Parameters
•
—
all
Displays the fan and temperature general status
62
1190