Show Vlan Macs-Groups; Map Subnet Subnets-Group - Cisco Sx350 Cli Manual

Virtual Local Area Network (VLAN) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

67.25 show vlan macs-groups

Use the show vlan macs-groups EXEC mode command to display the MAC
addresses that belong to the defined MAC-based classification rules.
Syntax
show vlan macs-groups
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays defined MAC-based classification rules.
switchxxxxxx# show vlan macs-groups
MAC Address
--------------------- --------------------- ---------------------
00:12:34:56:78:90
00:60:70:4c:73:ff

67.26 map subnet subnets-group

Use the map subnet subnets-group VLAN Configuration mode command to map
an IP subnet to a group of IP subnets. Use the no form of this command to delete
the map.
Syntax
ip-address prefix-mask
map subnet
ip-address prefix-mask
no map subnet
Mask Group ID
20
40
subnets-group
22
1
group
67
1280