Show Cable-Diagnostics Cable-Length - Cisco Sx350 Cli Manual

PHY Diagnostics Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
gi1 3 Test has not been performed
gi1 4
Open

44.3 show cable-diagnostics cable-length

To display the estimated copper cable length attached to all ports or to a specific
port, use the show cable-diagnostics cable-length Privileged EXEC mode
command.
Syntax
show cable-diagnostics cable-length
Parameters
•
interface-id—(Optional) Specify an Ethernet port ID.
Command Mode
Privileged EXEC mode
User Guidelines
The port must be active and working at 100 M or 1000 M.
Example
The following example displays the estimated copper cable length attached to all
ports.
switchxxxxxx# show cable-diagnostics cable-length
Port Length [meters]
---- -----------------
gi11 < 50
gi12
Copper not active
gi13
110-140
64 13:32:00 23 July 2010
[interface interface-id
44
]
888