Boot Localization - Cisco Sx350 Cli Manual

18
423
Use the no boot config command, to uninstall Startup Configuration. The
uninstalled file is deleted.
Example
Example 1. The following example installs Startup Configuration from a TFTP
server:
switchxxxxxx(config)#
tftp://1.1.1./confiration-files/config-v1.9.dat
Example 2. TThe following example installs Startup Configuration from FLASH:
switchxxxxxx(config)#
Example 3. The following example unsets the current Startup Configuration:
switchxxxxxx(config)#
Example 4. The following example installs Startup Configuration from the Running
Configuration file:
switchxxxxxx(config)#
Example 5. The following example installs Startup Configuration from the Mirror
Configuration file:
switchxxxxxx(config)#

18.4 boot localization

To install a file as the Secondary Language Dictionary file, use the boot localization
command in Privileged EXEC mode. To return to the default, use the no form of this
command.
boot config
boot config flash://confiration-files/config-v1.9.dat
no boot config
boot config running-confg
boot config mirror-confg
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
File System Commands