Cisco Sx350 Cli Manual page 1031

Router Resources Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
IPv6 policy Entries
Non-IP Entries:
- Unit 1
- Unit 2
- Unit 5
Setting the new configuration of route entries requires saving the
running-configuration file to startup-configuration file and rebooting the
system, do you want to continue? (Y/N) [N] Y
Example 2
The following example defines the supported number of IPv4 and IPv6 routing
entries. In the example, the configured router entries are less than the router
entries which are currently in use. Using this configurations means that the system
will not have enough resources for the running again in the existing network:
switchxxxxxx(config)#
The maximal number of IPv4 Routing entries and IPv6 Routing Entries is 3072. The
number is Non-IP Entries is 3096.
IPv4 Entries
Number of Routes
Number of Neighbors
Number of Interfaces
IPv6 Entries
Number of Routes
Number of Neighbors
Number of Interfaces
Number of On-Link Prefixes
IPv4 Multicast Entries
Number of Multicast Routes
IPv6 Multicast
Number of Multicast Routes
0
93%
94%
90%
system router resources ip-entries 128 ipv6-entries 32
In-Use Reserved (Current)
------ ------------------
232
20
12
100
1024
20
12
100
1
12
6
40
5
12
400
400
400
Reserved (New)
--------------
1024 128
1024 32
1024
1024
52
12
1024
1024
1030