Show Vlan Subnets-Groups - Cisco Sx350 Cli Manual

Virtual Local Area Network (VLAN) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
•
vlan-id
—Defines the VLAN ID associated with the rule.
Default Configuration
N/A
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
The VLAN classification rule priorities are:
•
MAC-based VLAN (Best match among the rules)
•
Subnet-based VLAN (Best match among the rules)
•
Protocol-based VLAN
•
PVID
Example
The following example maps an IP subnet to the group of IP subnets 4. It then
maps this group of IP subnets to VLAN 8
switchxxxxxx(config)#
switchxxxxxx(config-vlan)#
switchxxxxxx(config-vlan)#

67.28 show vlan subnets-groups

Use the show vlan subnets-groups EXEC mode command to display
subnets-groups information.
Syntax
show vlan subnets-groups
Parameters
N/A
Default Configuration
N/A
vlan database
map subnet 172.16.1.1 24
switchport general map subnets-group
67
subnets-group 4
4 8
vlan
1282