58
1125
Default Configuration
N/A
Command Mode
MST Configuration mode
Example
The following example exits the MST Configuration mode without saving changes.
switchxxxxxx(config)#
switchxxxxxx(config-mst)#
58.29 show spanning-tree
Use the show spanning-tree Privileged EXEC mode command to display the
spanning-tree configuration.
Syntax
[interface-id] [
show spanning-tree
[detail] [active | blockedports] [
show spanning-tree
mst-configuration
show spanning-tree
Parameters
•
instance-id
instance
•
detail—Displays detailed information.
•
active—Displays active ports only.
•
blockedports—Displays blocked ports only.
•
mst-configuration—Displays the MST configuration identifier.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
spanning-tree mst configuration
abort
instance-id]
instance
—Specifies the spanning tree instance ID. (Range: 1–
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Spanning-Tree Commands
instance-id]
instance
.
)
7