Vlan Prohibit-Internal-Usage - Cisco Sx350 Cli Manual

67
1293
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays information on the source and receiver ports of
Multicast-TV VLAN 1000.
switchxxxxxx#
show vlan multicast-tv vlan
Source Ports Receiver Ports
------------ ----------------------
gi13, gi14 gi11-2

67.38 vlan prohibit-internal-usage

Use the vlan prohibit-internal-usage command in Global configuration mode to
specify VLANs that cannot be used by the switch as internal VLANs.
Syntax
vlan prohibit-internal-usage none | {add | except | remove}
Parameters
•
none—The Prohibit Internal Usage VLAN list is empty: any VLAN can be
used by the switch as internal.
•
except—The Prohibit Internal Usage VLAN list includes all VLANs except
the VLANs specified by the
vlan-list
the argument can be used by the switch as internal.
•
add—Add the given VLANs to the Prohibit Internal Usage VLAN list.
•
remove—Remove the given VLANs from the Prohibit Internal Usage VLAN
list.
•
vlan-list —List of VLAN. Separate nonconsecutive VLAN IDs with a comma
and no spaces. Use a hyphen to designate a range of IDs. The VLAN ID that
can be used is from 1 through 4094.
Virtual Local Area Network (VLAN) Commands
1000
vlan-list
argument: only the VLANs specified by
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
vlan-list