Smartport Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
This command is effective only when Auto Smartport is globally enabled.
Example
Enables the Auto Smartport feature on port 1:
switchxxxxxx(config)#
switchxxxxxx(config-if)#
55.9 macro auto smartport type
The macro auto smartport type Interface Configuration mode command manually
(statically) assigns a Smartport type to an interface. The no format of the
command removes the manually-configured type and returns it to default.
Syntax
macro auto smartport type
parameter-name value
[
no macro auto smartport type
Parameters
•
smartport-type
•
parameter-name value
(Range: printer, desktop, guest, server, host, ip_camera, ip_phone,
ip_phone_desktop, switch, router or wireless access point (ap)).
Default Configuration
parameter-name value
the voice VLAN, the default value is the default voice VLAN.
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
interface gi11
macro auto smartport
smartport-type
parameter-name value
[
—Smartport type.
—Specifies the parameter name and its value
—Parameter default value. For instance, if the parameter is
parameter-name value
[
]]]
55
1068