Ipv6 Source Guard Policy - Cisco Sx350 Cli Manual

29
677

29.51 ipv6 source guard policy

To define an IPv6 Source Guard policy name and place the user in IPv6 Source
Guard Configuration, use the ipv6 source guard policy command in Global
Configuration mode. To remove the IPv6 Source Guard policy name, use the no
form of this command.
Syntax
ipv6 source guard policy
no ipv6 source guard policy
Parameters
•
policy-name
—The IPv6 Source Guard policy name (up to 32 characters).
Default Configuration
No IPv6 Source Guard policies are configured.
Command Mode
Global Configuration mode
User Guidelines
This command defines the IPv6 Source Guard policy name, and places the router
in IPv6 Source Guard Policy Configuration mode.
The following commands can be configured in IPv6 Source Guard Policy
Configuration mode:
•
trusted-port (IPv6 Source Guard)
Each policy of the same type (for example, IPv6 Source Guard policies) must have
a unique name. Policies of different types can have the same policy name.
The switch supports one predefined IPv6 Source Guard policy named:
"port_default":
ipv6 source guard policy port_default
exit
The policy cannot be removed, but it can be changed. The no ipv6 source guard
policy does not remove the policy, it only removes any policy configurations
defined by the user.
policy-name
policy-name
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
IPv6 First Hop Security