Show Rmon Alarm - Cisco Sx350 Cli Manual

Remote Network Monitoring (RMON) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

51.3 show rmon alarm

To display alarm configuration, use the show rmon alarm Privileged EXEC mode
command.
Syntax
number
show rmon alarm
Parameters
number
alarm —Specifies the alarm index. (Range: 1–65535)
Command Mode
Privileged EXEC mode
Example
The following example displays RMON 1 alarms.
switchxxxxxx#
show rmon alarm
Alarm 1
-------
OID: 1.3.6.1.2.1.2.2.1.10.1
Last sample Value: 878128
Interval: 30
Sample Type: delta
Startup Alarm: rising
Rising Threshold: 8700000
Falling Threshold: 78
Rising Event: 1
Falling Event: 1
Owner: CLI
1
51
1014