Show Ip Route Summary - Cisco Sx350 Cli Manual

IP Routing Protocol-Independent Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
C> 10.119.0.0/16 0/1
C> 10.120.0.0/16 0/1
C> 20.1.0.0/16 0/1
C> 30.19.0.0/16 0/1
C> 100.1.0.0/16 0/1
C> 110.9.0.0/16 0/1
C> 120.120.0.0/16 0/1

25.6 show ip route summary

Use the show ip route summary command in User EXEC or Privileged EXEC mode
to display the current contents of the IP routing table in summary format.
Syntax
show ip route summary
Parameters
N/A.
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
Example
The following is sample output from the show ip route summary command:
switchxxxxxx#
show ip route summary
IP Routing Table Summary - 90 entries
35 connected, 25 static
Number of prefixes:
/16: 16, /18: 10, /22: 15, /24: 19
0.0.0.0 vlan2
0.0.0.0 vlan3
0.0.0.0 vlan5
0.0.0.0 vlan2
0.0.0.0 vlan1
0.0.0.0 vlan3
0.0.0.0 vlan2
25
530