Show Line - Cisco Sx350 Cli Manual

34
753
Default Configuration
The default speed is 115200 bps.
Command Mode
Line Configuration Mode
User Guidelines
The configured speed is only applied when autobaud is disabled. This
configuration applies to the current session only.
Example
The following example configures the line baud rate as 9600 bits per second.
switchxxxxxx(config-line)#

34.5 show line

To display line parameters, use the show line Privileged EXEC mode command.
Syntax
[ | telnet | ssh]
show line console
Parameters
•
console—(Optional) Displays the console configuration.
•
telnet—(Optional) Displays the Telnet configuration.
•
ssh—(Optional) Displays the SSH configuration.
Default Configuration
If the line is not specified, all line configuration parameters are displayed.
Command Mode
Privileged EXEC mode
speed 9600
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Line Commands