Ipv6 Mld Snooping Vlan Querier Election - Cisco Sx350 Cli Manual

42
MLD Snooping Commands
Command Mode
Global Configuration mode
User Guidelines
The MLD Snooping querier can be enabled on a VLAN only if MLD Snooping is
enabled for that VLAN.
Example
The following example enables the MLD Snooping querier on VLAN 1:
switchxxxxxx(config)# ipv6 mld snooping vlan 1 querier

42.5 ipv6 mld snooping vlan querier election

To enable MLD Querier election mechanism of an MLD Snooping querier on a
specific VLAN, use the ipv6 mld snooping vlan querier election command in
Global Configuration mode. To disable Querier election mechanism, use the no
form of this command.
Syntax
vlan-id
ipv6 mld snooping vlan querier election
vlan-id
no ipv6 mld snooping vlan querier election
Parameters
•
vlan-id
—Specifies the VLAN.
Default Configuration
Enabled
Command Mode
Global Configuration mode
User Guidelines
Use the no form of the ipv6 mld snooping vlan querier election command to
disable MLD Querier election mechanism on a VLAN.
845 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide