Table of Contents
Advertisement
RSA and Certificate Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
See Keys and Certificates for information on how to display and copy this key pair.
Erasing the startup configuration or returning to factory defaults automatically
deletes the default keys and they are recreated during device initialization.
Example
The following example generates a self-signed certificate for HTTPS whose
length is 2048 bytes.
switchxxxxxx(config)#
54.6 crypto certificate request
The crypto certificate request Privileged EXEC mode command generates and
displays a certificate request for HTTPS.
Syntax
number
crypto certificate
organization
location
] [loc
Parameters
•
number
—Specifies the certificate number. (Range: 1–2)
•
The following elements can be associated with the key. When the key is
displayed, they are also displayed.
-
common- name
cn
address. (Length: 1–64 characters). If unspecified, defaults to the
lowest IP address of the device (when the certificate is generated).
-
organization-unit
ou
name. (Length: 1–64 characters)
-
organization
or
characters)
-
location
loc
characters)
-
st
state
—Specifies the state or province name. (Length: 1–64
characters)
crypto certificate 1 generate key-generate 2048
[cn common- name
request
state
country]
] [st
] [cu
—Specifies the fully qualified device URL or IP
—Specifies the organization-unit or department
—Specifies the organization name. (Length: 1–64
—Specifies the location or city name. (Length: 1–64
54
organization-unit
] [ou
] [or
1050
Advertisement
Table of Contents
