Sntp Unicast Client Poll - Cisco Sx350 Cli Manual

Clock Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP servers.
Example
The following example enables the device to use SNTP Unicast clients.
switchxxxxxx(config)#

9.19 sntp unicast client poll

To enable polling for the SNTP Unicast clients, use the sntp unicast client poll
command in Global Configuration mode. To disable the polling, use the no form of
this command.
Syntax
sntp unicast client poll
no sntp unicast client poll
Parameters
N/A
Default Configuration
Polling is enabled.
Command Mode
Global Configuration mode
User Guidelines
The polling interval is 1024 seconds.
sntp unicast client enable
9
256