Show Bridge Multicast Unregistered - Cisco Sx350 Cli Manual

4
165
Command Mode
Privileged EXEC mode
Example
The following example displays the Multicast configuration for VLAN 1.
switchxxxxxx# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Forward-All
Port Static
----- ---------
gi11 Forbidden
gi12 Forward
gi13 -

4.31 show bridge multicast unregistered

To display the unregistered Multicast filtering configuration, use the show bridge
multicast unregistered Privileged EXEC mode command.
Syntax
show bridge multicast unregistered [
Parameters
interface-id
—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
Display for all interfaces.
Command Mode
Privileged EXEC mode
Status
------
Filter
Forward(s)
Forward(d)
interface-id
]
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Address Table Commands