Clock Dhcp Timezone - Cisco Sx350 Cli Manual

Clock Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Example
switchxxxxxx(config)#
switchxxxxxx(config-time-range)#
switchxxxxxx(config-time-range)#
9.2

clock dhcp timezone

To specify that the timezone and the Summer Time (Daylight Saving Time) of the
system can be taken from the DHCP Timezone option, use the clock dhcp
timezone command in Global Configuration mode. To restore the default
configuration, use the no form of this command.
Syntax
clock dhcp timezone
no clock dhcp timezone
Parameters
N/A
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
The TimeZone taken from the DHCP server has precedence over the static
TimeZone.
The Summer Time taken from the DHCP server has precedence over static
SummerTime.
The TimeZone and SummerTime remain effective after the IP address lease time
has expired.
The TimeZone and SummerTime that are taken from the DHCP server are cleared
after reboot.
time-range http-allowed
absolute start 12:00 1 jan 2005
absolute end 12:00 31 dec 2005
9
238