Copying And Pasting Text - Cisco Sx350 Cli Manual

Hide thumbs Also See for Sx350:

Table of Contents

Interface Naming Conventions

Keyboard Key

Ctrl+Z / End

Copying and Pasting Text

Up to 1000 lines of text (or commands) can be copied and pasted into the device.

It is the user's responsibility to ensure that the text copied into the device consists

of legal commands only.

When copying and pasting commands from a configuration file, make sure that the

following conditions exist:

A device Configuration mode has been accessed.

The commands contain no encrypted data, like encrypted passwords or keys.

Encrypted data cannot be copied and pasted into the device except for encrypted

passwords where the keyword encrypted is used before the encrypted data (for

instance in the enable password command).

Interfaces on the device can be one of the following types:

Fast Ethernet (10/100 kbits) ports—This can be written as FastEthernet,

Gigabit Ethernet (10/100/1000 kbits) ports—These can be written as

either GigabitEthernet or gi or GE.

—LAG (Port Channel)—Written as either Port-Channel or po.

VLAN—Written as VLAN

Tunnel—Written as tunnel or tu

Moves the cursor to the end of the command line.

Returns back to the Privileged EXEC mode from

any configuration mode.

Deletes one character left to the cursor position.

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

Introduction